
ServicesSliding Door Replacement
Sliding Door Replacement in Irvine
We take out the old slider, frame and all, and put in a new door that rolls easy, locks tight and keeps the heat out. We'll show you vinyl, fiberglass and aluminum side by side so you can pick the frame that fits your home.
When a New Slider Makes Sense
A lot of sliders around Irvine are the original aluminum doors with single-pane glass. The frames get hot in the afternoon sun, the track wears down and the rollers grind. After enough years the panel drags no matter how much you clean the track.
Replacing the whole unit fixes all of it at once. You get a new track, new rollers, new weatherstripping and dual-pane glass. The panel glides, the lock lines up and the room by the door stops feeling like a hot spot in summer.
Most of the choice comes down to the frame. Vinyl, fiberglass and aluminum each have real trade-offs, and we walk you through them at your home before you spend anything.

What the Job Includes
- 01
Frame material walkthrough
Vinyl is the most common pick. It insulates well, never needs paint and costs the least. Fiberglass is stiffer and holds its shape in direct sun, so it suits wide openings facing south or west. Aluminum gives you the thinnest frame and the most glass, but it moves more heat.
- 02
Tempered dual-pane glass
Code requires tempered glass in a door. We pair it with dual-pane, low-E glass that cuts the heat coming through without making the room dark.
- 03
Full removal of the old door
We pull the panels, the frame and the old track. Nothing new gets set on top of a worn sill.
- 04
A look under the threshold
With the old unit gone, the wood beneath the track is out in the open. Any water damage gets pointed out to you, with photos, before a single repair starts.
- 05
Flashing, sealing and adjustment
We flash and seal the new frame, then set the rollers and strike plate so the door slides with one hand and locks without a shove.
- 06
Haul-away and cleanup
The old door leaves with us. We vacuum the track area and wipe down the glass before we go.
Questions about Sliding Door Replacement?
Call(949) 638-3312Signs Your Slider Is Done
It drags or jumps the track
Worn rollers and a dented aluminum track make the panel heavy. Once the track itself is bent, a new door is the clean fix.
Fog between the panes
If an older dual-pane door looks cloudy inside the glass, the seal has failed. The insulating gas is gone and it won't clear up.
The room by the door runs hot
Single-pane glass and bare aluminum frames pass a lot of heat. If that room is always the warmest in the house, the door is a big reason.
Drafts and dust at the edges
Flattened weatherstripping lets in air, dust and noise. You may see daylight at the latch side when the door is shut.
The lock won't catch
When the frame shifts or the panel sags, the latch stops meeting the strike. A door that won't lock right is a security problem, not just an annoyance.
How the Day Goes
- 1
Estimate at your home
We measure the opening, check the sill and bring frame samples so you can see and feel each material. You get a written price with no sales pressure and no obligation.
- 2
Ordering the door
Sliders are built to size. We order yours after you sign off on the frame, glass and color, and we call you when it's in.
- 3
Removal and prep
We cover the floor inside and set up a work area outside. The old door comes out, we clean the opening and deal with anything we found at the sill.
- 4
Setting and sealing
The new frame goes in plumb and level, then gets flashed, fastened and sealed. Most sliders are in and working the same day.
- 5
Walkthrough
We slide it, lock it and show you how to keep the track clean. You check it before we pack up.
What Moves the Price
Every slider gets priced on its own size and setup, so we give you the number after we see the opening. Free same day estimates are available. The visit comes with no sales pressure and no obligation, and you keep the written price either way.
- Frame material
- Vinyl costs the least. Fiberglass and aluminum cost more for different reasons: strength and heat resistance in one case, slim lines in the other.
- Size and panel count
- A standard two-panel door is simpler than a wide three- or four-panel unit. Bigger glass also means heavier panels and more hardware.
- Glass options
- Low-E coatings, tints and laminated glass each add to the cost. We'll tell you which ones actually matter for the side of the house the door faces.
- Condition of the sill
- If the subfloor under the old track is soft from water, it needs repair before the new door goes in. We show you photos first.
- Stucco and trim work
- Some installs fit inside the existing frame. Others need the stucco cut back and patched for a proper seal, which adds time.
Sliding Door Questions
Will a new slider fit the same opening?
Almost always. We order the door to the size of your existing opening. If you want a wider door, that's a framing change, and we'll talk through it at the estimate.
Which frame material should I pick?
For most homes here, vinyl is the best value. It insulates well and needs no paint. If the door is wide or takes full afternoon sun, fiberglass holds up better. Pick aluminum if you want the most glass and the thinnest frame.
How long will the opening be open?
Usually a few hours. We don't take the old door out until the new one is on site, and you have a working, locking door by the end of the day.
Do I need a permit?
Door replacements in California have to meet energy code rules for the glass. Where the city needs a permit, we pull it and handle the inspection.
Can you match my new windows?
Yes. If you're doing window replacement too, we can order the door in the same frame material and color so everything lines up. Doing both at once also saves a trip.

See the Frames Before You Choose
We'll bring vinyl, fiberglass and aluminum samples to your home, measure the opening and give you a written price. No pressure, no obligation.