
ServicesWindow Installation
Window Installation in Irvine
We install new windows in additions, remodels and freshly cut wall openings. Each one is flashed to keep water out, and we walk you through the frame materials so you pick the one that suits the room, not the one with the biggest margin.
New windows where there were none before
Window installation is different from swapping an old window for a new one. Here the opening is new or being reframed. That means the window goes in with a nailing fin, gets tied into the building paper and is sealed before the stucco or siding goes back on. Get that layering wrong and water finds its way behind the wall years later.
Most of our installation work is for room additions, kitchen and bath remodels, garage conversions and walls being cut to let in more light. If you already have windows and just want better ones, our Window Replacement or Window Retrofitting pages are a better fit.
We spend real time on materials at the estimate. Vinyl, fiberglass and aluminum each behave differently in strong sun, and the right choice for a south-facing family room may not be the right choice for a small bathroom.
What the job includes
- Measuring the rough opening
- We check the framed opening for size, square and level before anything is ordered. If the framer is still on site, we can tell them what the window needs so the opening comes out right the first time.
- Choosing vinyl, fiberglass or aluminum
- Vinyl is low upkeep and holds heat out well. Fiberglass moves very little as temperatures swing, so seals stay tight on big units. Aluminum gives thin frames and lots of glass but carries more heat through. We lay out the trade-offs plainly.
- Flashing and sill protection
- Each window gets a sloped sill pan or flashing tape at the bottom, then side and head flashing lapped in the right order. Water that gets behind the stucco has a path back out instead of into the framing.
- Setting, shimming and sealing
- The unit is set plumb and level, shimmed at the right points and fastened through the fin. We check that sashes open, close and lock smoothly before we call it done.
- Glass package selection
- We go over low-E coatings and gas fill and what each does for the room. Code asks for safety glass in certain spots, like beside a bathtub or close to a door or the floor, and we order it wherever it applies. Our Energy Efficient Windows page covers glass options in more depth.
- Cleanup
- Packaging, shims and cut-offs leave with us. We wipe down the frames and glass so the window is ready to use.
When new window installation is the right call
You are adding square footage
A new bedroom, family room or second story needs windows for light, air and, in bedrooms, a code-sized way out in a fire.
A room feels dark or stuffy
Cutting a new opening in a solid wall can change how a room feels more than paint or lighting. We can tell you what size works for that wall before you commit.
You are converting a garage
Garage conversions usually need new windows to meet code for a living space. The opening often has to be framed and flashed from scratch.
Your remodel moves or resizes an opening
If the kitchen sink window is getting wider or a bathroom window is moving, it is a new install, not a swap. The framing, flashing and finish all change.
Old work left water stains below a window
Stains or soft drywall under a window installed by someone else usually point to missing or reversed flashing. Pulling it and reinstalling it properly fixes the cause, not just the stain.
What sets the price
Every installation is priced from the opening, the window and the wall around it. We go over each part at the estimate so you can see where the money goes and change what matters to you before anything is ordered.
Frame material
Vinyl usually costs least. Fiberglass and aluminum cost more, and the gap grows on large or custom-shaped units.
Size and shape
Big picture windows, arches and specialty shapes take more glass and more hands to set safely.
Glass choices
Low-E coatings, safety glass and laminated or sound-reducing glass each add to the cost of the unit.
State of the opening
A clean, square opening goes quickly. An opening that needs framing correction or stucco patching takes longer and costs more.
Permits
New openings and additions normally need a permit. We explain what your project needs and how the inspection fits into the schedule.
How an installation goes
- 1
Estimate at your home
We look at the opening or the plans, talk through what the room is for and show you frame samples. You get a written estimate. There is no sales pressure and no obligation.
- 2
Final measure and order
Once the opening is framed, we take final measurements and order the windows to size. Custom units take time to build, and we give you a realistic arrival window.
- 3
Install day
We protect floors and nearby plants, then flash the opening, set the window and seal it in. Most single openings take a few hours; a full addition may take a day or two.
- 4
Check and walk-through
We test every sash and lock with you, explain any care your new frames need and leave the area clean. If your project has a permit, we make sure the install is ready for the inspector.

Window installation questions
What is the difference between installation and replacement?
Installation means putting a window into a new or reframed opening, usually with a nailing fin tied into the wall wrap. Replacement means taking out an existing window and putting a new one in its place. If you are not sure which your project is, we can tell you at the estimate.
Which frame holds up best in strong sun?
Fiberglass expands and contracts very little, so it stays tight on large windows that bake in afternoon sun. Good vinyl also does well and costs less. Aluminum works fine but passes more heat, so we pair it with a strong glass package.
Do you need to cut into my stucco?
For a brand-new opening, yes, the wall has to be opened and the window flashed before it is closed up again. On an addition still under construction, the window usually goes in before stucco, which is the cleanest way to do it.
Can you work with my general contractor?
Yes. We are happy to coordinate with your builder on rough opening sizes and timing so the windows go in after framing and before the walls are finished.
Will a bedroom window need to meet egress rules?
Yes. A bedroom needs a window big enough and low enough for someone to climb out if they ever have to leave fast. We check the opening size and sill height against code before ordering so it passes inspection the first time.

Planning an addition or remodel?
Tell us about the room and the wall. We will come out, look at the opening and lay out your frame and glass options side by side.